Cisco最新CCNP642-892考题分析

1. what action should a network administrator take to enable vtp pruning on an entire management domain?

a. enable vtp pruning on any client switch in the domain

b. enable vtp pruning on every switch in the domain

c. enable vtp pruning on any switch in the management domain

d. enable vtp pruning on a vtp server in the management domain

answer:d

2. how does vtp pruning enhance network bandwidth?

a. by restricting unicast traffic to across vtp domains

b. by reducing unnecessary flooding of traffic to inactive vlans

c. by limiting the spreading of vlan information

d. by disabling periodic vtp updates

answer:b

3. in the hardware address 0000.0c07.ac0a what does 07.ac represent?

a. vendor code

b. hsrp group number

c. hsrp router number

d. hsrp well-known physical mac address

e. hsrp well-known virtual mac address

answer:e

4. when building an ip multicast domain using pim which mode assumes that other routers do not want to forward multicast packets for the group?

a. pim-dm

b. pim-sm

c. pim-rp

d. cgmp

e. igmp snooping

answer:b

5. which statement describes dynamic trunking protocol (dtp) mode ’desirable’?

a. the interface is put into permanent trunking mode and negotiates to convert the link into a trunk link.

b. the interface actively attempts to convert the link to a trunk link.

c. the interface is put into permanent trunking mode but prevented from generating dtp frames.

d. the interface is put into a passive mode, waiting to convert the link to a trunk link.

answer:b

6. which three statements are correct with regard to the ieee 802.1q standard? (choose three.)

a. the packet is encapsulated with a 26 byte header and a 4 byte fcs

b. the ieee 802.1q frame format adds a 4 byte field to a ethernet frame

c. the ieee 802.1q frame retains the original mac destination address

d. the ieee 802.1q frame uses multicast destination of 0x01-00-0c-00-00

e. protocol uses point-to-point connectivity

f. protocol uses point-to-multipoint connectivity

answer:bce

7. in a customer’s network, vlan trunking protocol (vtp) is running with a domain named main1. vlans 1,2,3,4,5,10,20 are active on the network. suddenly the whole network goes down. no traffic is being passed on vlans 2,3,4,5,10,20, however traffic passes on vlan 1 and indicates all switches are operational. right before the network problem occurred, a switch named test1 was added to the network. what three configuration issues on test1 could be causing the network outage? (choose three.)

a. test1 is configured as a vtp server with a different domain name.

b. test1 is not configured to participate in vtp.

c. test1 is configured as a vtp server with the domain name main1.

d. test1 has a lower vtp configuration revision than the current vtp revision.

e. test1 has a higher vtp configuration revision than the current vtp revision.

f. test1 is configured with only vlan1.

answer:cef

8. what is correct about the bgp synchronization command? (choose two.)

a. synchronization must be enabled when implementing a multi-homed bgp connection to multiple isps.

[1] [2]  下一页

• 计算机等级考试试题
• 软件水平考试
• 思科认证
• 微软认证
• ORACLE/CIW认证
• Linux认证

• · CCNA基础实验：配置帧中继网络
• · CCNA考试题库中英文翻译版
• · 思科认证CCNA（640-801）IOS命令大全
• · Cisco升级CCNA为640-802并推CENNT认证
• · 轻松掌握CCNP的学习方法
• · 温故知新：MST学习笔记
• · 2011思科新版CCNP认证体系全攻略
• · CCNA学习基础：DynamicACL的应用
• · CCNA试验考试命令总结
• · Cisco最新CCNP642-892考题分析

• · Cisco考试再认证常见31问题解答
• · 网络运维管理成企业信息化第一管家
• · 获得CCNA和CCNP认证的必备条件和有效期
• · 新版640-802的CCNA认证英文教材
• · 路由器网络分层解决方案
• · 如何识别真正的双线主机服务
• · Cisco认证实用技巧
• · 路由器应用技术——Cisco的MAC地址与IP绑
• · 巧妙利用路由器设置防范漏洞攻击
• · 思科Cisco认证最新真题50道：TCP/IP