Cisco考试中Switch命令详细说明
1.在基于ios的交换机上设置主机名/系统名:
switch(config)# hostname hostname
在基于cli的交换机上设置主机名/系统名:
switch(enable) set system name name-string
2.在基于ios的交换机上设置登录口令:
switch(config)# enable password level 1 password
在基于cli的交换机上设置登录口令:
switch(enable) set password
switch(enable) set enalbepass
3.在基于ios的交换机上设置远程访问:
switch(config)# interface vlan 1
switch(config-if)# ip address ip-address netmask
switch(config-if)# ip default-gateway ip-address
在基于cli的交换机上设置远程访问:
switch(enable) set interface sc0 ip-address netmask broadcast-address
switch(enable) set interface sc0 vlan
switch(enable) set ip route default gateway
4.在基于ios的交换机上启用和浏览cdp信息:
switch(config-if)# cdp enable
switch(config-if)# no cdp enable
为了查看CISCO邻接设备的cdp通告信息:
switch# show cdp interface [type modle/port]
switch# show cdp neighbors [type module/port] [detail]
在基于cli的交换机上启用和浏览cdp信息:
switch(enable) set cdp {enable|disable} module/port
为了查看cisco邻接设备的cdp通告信息:
switch(enable) show cdp neighbors[module/port] [vlan|duplex|capabilities|detail]
,Cisco考试中Switch命令详细说明- Cisco考试中Switch命令详细说明
- › Cisco升级CCNA为640-802并推CENNT认证
- › Cisco最新CCNP642-892考题分析
- › Cisco考试再认证常见31问题解答
- › Cisco最新CCNP642-901认证考题分析
- › 思科Cisco认证最新真题50道:TCP/IP
- › Cisco考试中Switch命令详细说明
- › Cisco认证实用技巧
- › 路由器应用技术——Cisco的MAC地址与IP绑定
- 在百度中搜索相关文章:Cisco考试中Switch命令详细说明
- 在谷歌中搜索相关文章:Cisco考试中Switch命令详细说明
- 在soso中搜索相关文章:Cisco考试中Switch命令详细说明
- 在搜狗中搜索相关文章:Cisco考试中Switch命令详细说明
tag: 思科认证,思科认证考试,思科认证培训,思科认证网络工程师,考试频道 - 计算机考试 - 思科认证